Free accountFree account Desk plan
Simple Desk Plans
A simple desk from one sheet: a top on two panel legs, braced by a modesty panel at the back so it does not rack. Type the width, depth and height you need, from 650 to 800 mm tall, and the three parts are recalculated.
- Default size
- 1200 × 750 × 600 mm
- Parts
- 4 pieces · 3 sizes
- Sheets (2440 × 1220 mm (4 × 8 ft))
- 1 carcass
- Difficulty
- Easy
- Build time
- About 3 hours
- Edge band
- 6.1 m
Cut list (default size)
| Part | Qty | Length | Width | Thick. | Board | Edges |
|---|---|---|---|---|---|---|
| Top | 1 | 1200 | 600 | 18 | Carcass board 18 mm | |
| Leg panel | 2 | 732 | 540 | 18 | Carcass board 18 mm | |
| Modesty panel | 1 | 1084 | 300 | 18 | Carcass board 18 mm |
Sizes in millimetres; length runs along the grain. Edges: bold lines are banded.
0 more parts, the sheet layout and the cut order are in the full plan.Resize it to any size, print labels and save it in a project.Sign in free to open it
How it is built
- Leg panels are set in 40 mm from each end of the top.
- The modesty panel joins the two legs under the back of the top: screw it to both legs and to the top.
Common mistakes
- Leaving out the modesty panel: without it the desk racks sideways.
Tools you need
- Track saw or table saw
- Drill/driver
- Edge banding iron
Frequently asked questions
What height should a desk be?
730–760 mm (29–30 in) is standard, but the best height is about 39% of your own height. See our standard desk height guide.
How deep should a desk be?
600 mm (24 in) for a laptop or a small monitor, 750 mm (30 in) for large monitors at arm’s length.
Can I add drawers?
Put a drawer unit under one end: our nightstand plan, at 550–700 mm tall, fits under the top.
Related guides
How to Build a DeskHow to build a desk out of wood or plywood: the right height and size, a top on two cabinets or panel legs, a modesty panel against wobble, and cable holes.How to Cut Plywood With a Circular SawCut plywood straight and without splinters using a circular saw: blade choice, support, a straightedge guide, good face down, and planning your cuts first.How to Use a Pocket Hole JigHow to use a pocket hole jig step by step: set it for the board, drill, clamp and drive the screw. With a pocket hole screw size chart and tips for MDF.
